10 Best Sander For Exterior Paint Removal: Reviews, Buyer’s Guide, and More (2022)

We use affiliate links. If you purchase something using one of these links, we may receive compensation or commission.

Introduction

I have always been lazy when it comes to some do-it-yourself projects. My mom has been behind my back to remove the old paints from our kitchen walls for about four months.

Just like Bill Gates said, a lazy person like me always finds the easiest way to complete a task. Therefore, I found the best sander for exterior paint removal and finally gave a clean and soothing look to our kitchen.

Do you seek some knowledge? Then tighten your seatbelts because it is going to be a bumpy ride. Finding the best sander was always a hard job. There are two main types to consider- an orbital sander and a belt sander.

An orbital sander is most chosen by many users because of its ease of use on woods and leaving no scratch marks behind. This article will contain a review of the ten best sander models, types of sanders, safety precautions, buying guides, and many more.

Buckle up! Here it goes!

Comparison Table Of Best Sander For Exterior Paint Removal

Factors to Consider Before Buying sander for exterior paint removal

Driving Power

You will end up with lots of sanders in the market and many features to consider. But one thing that will matter the most is the power with which your sander’s motor will operate. The rating is often given as volt-ampere.

The more the volt-ampere value, the more efficient output you will get. All sanders may fulfill your demand in terms of removing paints, but the time required will vary, and depends on the driving power of the sander.

Lucky for you that you read this article. The mentioned models will have sufficient amperage capacity to finish your work within a reasonable amount of time.

Controlling the Speed

This part covers two things- Speed and control. You should not always focus on the velocity but also keep track to maintain that when you work on hard surfaces.

For constant efficiency, you need to have a speed control knob installed in your sander model. Many models come readily with this option, but if they are not, then you must accept the fact that you had poor research while buying your suitable sander.

Collection of Dust

Once you are done with sanding, the hard part is the cleanup. You will also have to think about keeping your environment clean. The specks of dust that are created may enter your lung, which will create unpleasant coughing afterward.

The solution will be to add dust resistance. The manufacturers of the sander company tend to minimize this by adding a dust bag adjacent to the model, which keeps your surroundings clean and maintains a good efficiency of your work.

Durability

It will define your sander’s life span. The sander goes through a lot of mechanical and electrical stress while you power them in your walls.

While looking at a particular model, make sure to look at its construction material. Alloys will give you the most durable with a longer lifespan. A strong body will help you to gain confidence while you work.

Weight

By this time, we are assuming you know how to use a sander. It requires continuous holding and moving from place to place. If you end up with a heavyweight model, your elbows might get numb, and your work might delay for a day or two.

Also, all the surface textures will not be the same, so there is the chance of losing self-balance very frequently.

Voltage Rating

There can sometimes be where your supply voltage may vary. Some electrical appliances can compensate for this fluctuation. The same goes for your sander, which should have the maximum voltage rating to withstand any change in the supply.

If not, your model will lose its lifespan from time to time.

Vibration

People always look for a calm environment to work in because it helps to concentrate on whatever it is you are doing. Unfortunately, finding a quiet sander is impossible.

The vibration that it generates while encountering the walls will create noise to disturb your ears. Take a good look at the vibration parameters while buying a sander.

You can go for the least vibration, or you can account for external protection of your ears with noise-cancelling headphones to improve your work efficiency.

Easy to use

One stressful work which will slow down your sanding job is the continuous change of the sanding pads. In some models, it is a real time-consuming work while changing the pads.

So, make sure to get that the sander allows quick and easy replacing of the pads and not to interrupt the workflow.

Review of 10 Best Sander For Exterior Paint Removal

1. DEWALT 20V MAX XR Palm Sander

The first product that is on our review list is the DEWALT 20V palm sander. Some of the amazing features that it includes are the brushless motor and variable speed control, with which you will be able to control your sanding depending on the medium.

The design is not very complex, and the options are understandable by any user, making it the ideal sanding machine. It has a built-in dust collector to keep your environment clean.

The power source of this machine requires a 5 Ah battery, and the paper clamp enables to hold paper securely for stressless installation.

The handle consists of textured rubber which gives you a firm and comfortable grip. The item dimension is 9.34 x 5.96 x 6.21 inches and this whole package is worth about 290 dollars.

The battery requires a 20V power supply, and the type is lithium-ion. As the variable speed control topic was mentioned earlier, it has a fancy name of 7-speed dial, which can go from 12000 to 14000 OPM.

Pros & Cons

Pros
  • The price is very low.
  • Brushless motor gives efficient sanding.
  • Firm grip.
  • Motor having powerful wattage.
  • The model comes with a paper clamp.
Cons
  • The batteries have a shorter lifespan.

Buy on Amazon

2. Wagner Spraytech 0513040 PaintEater Electric Palm Grip Paint Removal

Do you want something innovative? Here goes Wagner Spraytech PainEater, which is different from the other models that are mentioned. This paint removal is meant to do one thing, and that removes paint from wood, concrete, steel, and other media.

The mentionable features include a rotating palm sander which will not go gentle on the paint and produce a firm, smooth surface. The fibre disc that is installed effectively removes paint chips without clogging them with paint and dust. The disk operates with 2600 rpm to provide abrasive performance.

Wagner Spraytech will allow the removal of paints at any angle. If you hold it flat, you are accounting for the smoothness, and the angle elevation targets any cornered paint that is hard to remove.

The motor requires a high driving current of 3.2 amperes, and the open-web disc design eliminates paint and dust construct. On uneven terrain, the Flex-Disc technology adheres to contour for effective results.

The item weighs about 3.65 pounds, and the flawless design makes it the durability and strength for any project you throw at it. One interesting to notice is that this Wagner product comes with a 1-year guarantee. So, if you have any complaints regarding its performance, they gave you a period to do so.

Pros & Cons

Pros
  • Lightweight.
  • Cheap model.
  • High durability and longevity.
Cons
  • No batteries included.

Buy on Amazon

3. DEWALT 20V MAX Orbital Sander

Another DEWALT product to review. You can now measure the level of fame that this brand has. One key difference that it holds is that it is an orbital sander, and the previous version was a palm sander. What is the difference? Keep reading for more!

This sander weighs about 2.56 pounds, and the brushless motor that consists of produces efficient output without overheating. The variable speed control gives you a range between 8000 to 12000 RPM to adapt to your sanding surface.

It has a low-profile height from which allows the work to be done from a close angle and provides better output. The grip is constructed from textured rubber, and the battery rating is also 5 Ah as before.

This orbital sander also comes with a dust collection bag to store the maximum of the specks of dust so that they do not enter your lungs through the nose and create breathing problems and sneezing while you work.

The item dimension is given by ‎8.8 x 5.7 x 6.3 inches and the type of battery included is the lithium-ion. With little dollars spent on this model, you can account for fine work in your walls, woods, or other paint removing media.

Pros & Cons

Pros
  • High range of speed control.
  • It comes with a dust collection bag.
  • Provides three years of warranty.
Cons
  • More suited to low-scale paint removing jobs.

Buy on Amazon

4. BLACK+DECKER Mouse Detail Sander

It is a terrific alternative from Black and Decker for sanding in corners and other tight locations. These are the locations where removing paint from wood products might be the most challenging. You’ll need this sander if you have corners. Otherwise, you’ll have to do it by hand.

This model has a 3-position grip were for easy implementation for any kind of application. The shape of the sander helps you to get into tight spaces for efficient sanding. The paper shifting work has never been this easier after this product brings you the hook and loop system.

Highly sensitive built-in dust collection to keep your environment clean and the motor current rating is given by 1.2 amperes with 14000 RPM, which is the far greatest until now.

The design has been done in a compact way to account for the maneuverability, which further adds durability. The item weighs about only 2.4 pounds, and its dimension is given by ‎10.25 x 4.63 x 5.44 inches.

Black and Decker’s products provide you with two years of warranty so that you account for the change if there are any defaults in your buying product.

Pros & Cons

Pros
  • Lightweight.
  • Two years of warranty.
  • High RPM.
  • No batteries required.
Cons
  • Not suitable for high profile application.

Buy on Amazon

5. Bosch ROS20VSC Palm Sander

The Bosch 5″ Random Orbit Sander or Polisher offers an optimal mix of pad orbit and rotation for quick removal and a very well, ultra-smooth finish. This tool was created to help finish carpenters and cabinet builders complete their work fast and precisely, without leaving swirl traces. With an excellent onboard technology for filtering tiny particles, this sander helps customers to find the right speed for whichever task they need to complete.

This system is also accustomed to the hook and loop system with which you can easily attach the discs. The motor current rating is 3.5 ampere, and it also has the variable speed control to keep your work in a fine organizing line.

The dust collection system features a special macro filter technique that traps the dust particles more efficiently. If we shift our direction to the contents that you will be getting once you buy this kit, then they include a sanding pad, sanding disc, dampening ring, dust canister, and a vacuum adapter.

This model offers an outstanding offer of a 30-day money-back guarantee and a one year of manufacturer warranty.

Pros & Cons

Pros
  • Special macro filter system for the dust collection mechanism.
  • Hook and loop for the disc attachment.
  • The price is low.
  • Variable options on the disc.
Cons
  • Heavyweight model.

Buy on Amazon

6. BLACK+DECKER Random Orbit Sander

The brand’s name has fallen into a loophole. Therefore, the eventual winner in this classification is none other than Black+Decker. This sander is incredibly powerful equipment for removing paint and polishing a surface.

Furthermore, it will engage in a random orbiting activity. This package will come with a sander, a sanding sheet, and a dust bag. It has a capacity of 2 amps. A modern digital action feature has arrived, highlighting better and more accurate completion. It has a hook and loop mechanism, which is a unique feature.

Paper changes are quick and uncomplicated with hook and loop systems. Another unique feature is the dust-proof switch. It will effortlessly switch the dust and particles. The sander length is 5 inches, and the item dimension is given by 7 x 5 x 6 inches.

This plastic model power source is corded-electric, and the weight is about 3.16 pounds.

Pros & Cons

Pros
  • Two years of warranty.
  • Hook and loop system.
  • The super-efficient dust collection system.
Cons
  • No extra power supply is added.

Buy on Amazon

7. Makita BO5041 5″ Random Orbit Sander

Here we introduce you to a new brand that has set some real competition in the market. It provides you with smooth and high-speed sanding, and the name is none other than Makita Random Orbit Sander.

The variable speed control has a range between 4000-12000 OPM, which covers almost every high-profile operation. The built-in dust collection saves you from all the extra elbow work that must be done after you are finished with your paint removal works.

It offers you two handles, and the firm texture grip makes it very comfortable for sanding. This best sander for removing paint from wood measures 11.42 inches in height. 3.15 inches in depth and 7.87 inches in height, respectively. The disc diameter of this sander is 125 mm, and the orbit diameter is 2.8 mm, according to the parameters.

Pros & Cons

Pros
  • The orbital spin that it provides is swirl-free.
  • Comfortable grip.
  • Variable speed control.
Cons
  • Cords have a lesser lifespan.

Buy on Amazon

8. BLACK+DECKER Electric Sander

This 0.25 orbital sander is perfect for sanding and detailing around the house. For efficient resource removal, this sander runs at 1,600 orbits OPM with 2.0 amps of power. This sander does have a high sediment collection system to ensure a clean work surface.

This model provides a 270 degree of sanding clearance, and with the tri-layer filtration process is sure of the efficient sander for beginners. It also comes with a paddle switch for an instant on/off application.

The item content shows sheet sandpaper, a paper punch, and a dust bag which focuses on cleaning the environment efficiently. The Black+Decker Electric sander comes in ‎8.81 x 5.13 x 6.31 inches of dimensions and weighs about 3 pounds. So, it is concluded that this model is also lightweight.

Pros & Cons

Pros
  • Two years of warranty.
  • Lightweight.
  • The price is low.
Cons
  • Electric cords have a shorter lifespan.

Buy on Amazon

9. Makita 9403 4″ X 24″ Belt Sander

Here we are encountered with a different type of sander- Belt sander, and the brand that has brought this is Makita. It is also a variable speed sander which is the light of hope for many carpenters, woodworkers, and other workers who rely on belt sanders.

Belt sander exerts a greater force compared to all other sander types that we have researched. It also outputs less noise which reduces sound pollution. The features that it includes are a highly durable 8.8-ampere motor and the speed control, high-efficiency dust collector to keep your environment clean.

As it is a different sander type, it has an auto-tracking system that will keep the belt in place without any manual adjustments. The design is low-profile, which has a very firm front grip.

Since Makita is a well-known brand for sanding, its 30-day full refund policy and a one year of warranty will surely gather your interest in buying them.

Pros & Cons

Pros
  • Robust current rating of the motor.
  • Speed control.
  • An efficient dust collection system.
Cons
  • The model is expensive.

Buy on Amazon

10. DEWALT 20V MAX Random Orbit Sander

Our review part ends with DEWALT 20V Random Orbit Sander. The brushless motor installed provides almost no heating in the system, which ensures higher efficiency. The variable speed control range starts from 8000 to 12000 OPM.

With a 2.0Ah battery, this Random Orbital Sander gives us the ability and power you need to get the job done. To aid with dust collection, a one-handed locking dust bag attaches securely to the wood sander, or the user can connect the sander directly to the DWV010 or DWV012 dust collectors.

Sanding is made easier with a rubber firm grip. Replacement 8-hole hook-and-loop sanding pad makes changing papers a breeze. The model weighs about 4.29 pounds, and the item dimension are given by ‎10.21 x 8.96 x 5.46 inches.

Pros & Cons

Pros
  • Firm grip with rubber texture.
  • Variable speed control.
  • Efficient dust collection.
Cons
  • Heavyweight.
  • Requires additional battery to power up.

Buy on Amazon

Types of Sander for exterior paint removal

Now that you know about the best sander for exterior paint removal, the most important factor to consider is what type of sander you should buy. Different sanders are suited for various tasks, and you must choose the right sander most appropriate for your walls.

With little information delivered, let us dig into the types of sander that we need to discuss.

  • Orbital or Disc sander
  • Belt sander
  • Palm sander
  • Detail sander
  • Power Drywall sander

Orbital or Disc sander

It is the type of sander that uses circular motion concerning the workpiece for smooth sanding. It is applicable for any surface such as wood, plastic, or even metal bodies.

Another feature is that they come with high OPMs, which completes the work in less amount of time. The fine grip handles of the orbital sander give you great precision, which makes your sanding balance even more soothing.

Now when should you choose an orbital sander? They work best if your sanding surface is flat, and they are mainly used to remove paint or rust. Make sure to hold them at even pressure across the pads to ensure the continuous distribution of friction.

Belt sander

It is the type of sander which is most used among many users. There is a chance you might have also used it and come to learn about it through this article. It is considered to be most efficient because of the force that it exerts during sanding.

They are effective on hard surfaces and prepare any woodwork for less aggressive tools. They come with certain features which maximize the system efficiency, such as engine yield, platen inclusion, and the ability to shift the machine as needed for comfort, speed, and many other things.

Though belt sander is effective, it might have some drawbacks such as heavyweight property, hard to maintain, or sudden start in the motor may lead to some unwanted accidents.

If you are an expert, I think you will know what to consider while you find the best sander for exterior paint removal.

Palm sander

It is the simplest of all sanders available in the market. Its meaning stands just like the name suggests. You can easily fit a palm sander in your hands.

There is a slight difference between a palm sander and an orbital sander, and we are here to make sure that you do not mix these two things. So down goes the list:

  • Palm sanders are rectangular, while the orbital sanders are squared in shape
  • Palm sanders have lesser volume, and they are comparatively lightweight
  • Palm sanders have orbital motions only
  • Orbital results in more heavy work while palm results in more precise work

Detail sander

These sanders are designed for precision, accessibility, and control. The main difference in a detail sander is that they consist of triangular sanding papers, which enables them to reach the corners very easily.

There are many sander models with this configuration available which varies according to the type of project. It is a good practice to mention some of the models, so here go some of the top picks:

  • For the overall best features- Bosch StarlockPlus Oscillating Multi-Tool Kit
  • For the best kits- DEWALT Multi Material Corded Oscillating Tool
  • For the best dust resistivity- BLACK+DECKER Mouse Detail Sander
  • For most narrow corners- Genesis GPS080 Corner Palm Sander
  • Honourable mention- WEN 6301 Electric Detailing Palm Sander

Power Drywall sander

As the name suggests, these are known as drywall sanders specially designed for sanding or smoothing the drywall. If you lack a ladder in your house, do not worry about it.

With this type of sanders, you can sand the ceiling standing on the floor. With less amount of stretching in your hands, you can reach for a good sanding efficiency.

For dust collection mechanisms, drywall sanders offer a vacuum system that sucks any dust particles swirling around the disc. It makes the sander more concerned about maintaining the environment as clean as possible.

But remember, drywall sanders for beginners can be a bit hard to handle for the first time. Please make sure you have enough guidelines and practices before using one on your walls.

Safety precaution for using a sander to remove exterior paint

How to safely remove colors using sanders? Safety should be a priority for any work that is done. Until now, we have briefed you about how efficiently you can remove paint from your objects.

But, if you do not care about your safety, you might not finish the project in good shape. So, here goes some of the precautions you should take while working with these machines.

As has been already mentioned, the belt sander weighs the most. So, make sure you have muscle work to carry this type of heavyweight tool. You do not want it falling and hurting your feet.

The motor in the sander might overheat, or the disc might encounter with your hands which might create some bruises and will stink later. So, make sure to wear safety gloves.

Make sure the electrical wires are safely coated with plastic. If there is any leak, you might end up with electric shock.

Removing old paints produces a huge amount of dust. Make sure that your sander has a dust bag installed with it. For your protection, wear a mask and protective goggles.

Tips for using sander when removing exterior paint

Knowing the best sander for exterior paint removal is one thing and learning how to remove paint is the other. Some might only stick to the first one. Luckily, we are here for you.

Otherwise, you might end up messing with your ceiling or kitchen walls. Below are some of the points that you should know while removing old paints.

Steady sanding

In a normal belt sander, the force required for sanding is much more. But when you use an orbit sander, do not exert that much pressure with the sander on your walls.

The sander is designed for working efficiently at slow, steady motions. Experts suggest using an orbit sander with 10 – 12 seconds for every linear foot.

As the saying goes, “slow and steady wins the race”, if you want to make your ceiling walls or wood boundaries smooth, then go slow sanding.

Apply less pressure

Always apply less pressure on your sander. The amount of good anchoring between your hand and the sander is the well-suited pressure in holding a sander.

If the applied pressure is greater than the required pressure, there might be some reverse force applied to the motor, which in turn can cause rough sanding on your surface. Also, it could damage the internal operating circuits of the motor.

Vacuum system for the dust

You must know how to clean up your surroundings after the sanding is over. Most sanders come with a vacuum system, especially power drywall sanders. The suction system allows the dust to go straight to the dust bag rather than in the environment.

It overall increases the system efficiency and keeps your working place neat and clean.

No tilting

One thing to frequently notice is that whenever someone sees a burn mark in the wood, they immediately tilt their sander to get rid of it. This is the wrong thing to do.

Do not ever tilt your sander! The function of a sander is to smooth the plane surface of the wood. Never use it for the purpose it is not meant to be.

You might end up with a bad scratch in your projects, and that might ruin your day.

Use different sandpaper grits

The sandpaper grits work in a formation like those we see in football. Each grit removes a scratch pattern left from the previous one.

So, if you are planning to use the same grit repeatedly, you might get a smooth surface, but God knows how long that will take. There are many ranges of grits available in sandpapers.

For smooth sanding, the range starts from 80 and goes all the way to 320. For this to implement, diversify your sandpaper by using variable disks of grit ranging between 100-150-220.

Keep your hopes to the limit

The amount of money that you are spending on this sander is much reasonable and affordable by all. So, you would not expect to last them forever or your disc to work on any hard surfaces.

Every component has its certain limits. Until that range, they will work perfectly. So, whenever your disc cannot cut the scratch because of too much dust, replace it with new ones, and you are good to go for a while.

Your time is valuable to us. So do not waste them on worn discs.

Best Sandpaper for Removing Paint From Wood

Do you know which sandpaper will be best suited for the best-suited sander? No, obviously. This part gives you a brief explanation for that.

Well, the question is broken down into two sections. One is what amount of grit to be taken into consideration in sandpaper? And the second is which sandpaper?

  • Best sandpaper grit
  • Best sandpaper

Best sandpaper grit

The amount of grit is inversely proportional to the type of surface. Now remember one other thing, you only want to remove the paint and not any part of the wood. Because applying the wrong grit on the bad surface may scratch off some unwanted woods.

A lower grit is applied for a harder surface, and a higher one is used for a soft surface. So, while you are trying to remove the paint only and make the surface smooth, I’d suggest starting with a higher grit and then gradually moving down according to your needs.

As has been already mentioned before, always use a variable number of grits for efficient smoothing.

Best sandpaper

To conclude this part, you will need information about what type of sander you are using. Suppose you use a typical 5” orbital sander to remove paint from wood. Our recommendation will be WORKPRO  5” variety packs sandpaper.

This pack will provide you with multiple grit sandpapers to tackle almost any paint-removing task that comes your way. There are accurately 80 pieces of sandpapers with grits ranging starting from 60 to 400.

Buy on Amazon

Belt Sander Vs Orbital Sander Vs Paint Eater

This section will focus on the two types of sander- Belt and Orbital- and Paint Eater. This part will contain a particular explanation and an overall comparison between them.

Belt Sander

They are the most powerful tool when it comes to the sanding world. They will require a perfect guideline to use unless it can cause sudden accidents. Some properties of sander include scribing, rough flattening, etc.

Let us discuss how will you choose a perfect belt sander for yourself. Most multipurpose belt sander comes with a 3-inch-wide range for the belt to take its place. Some specialized tasks are even designed for this type of belt.

When it comes to the classification, within this 3-inch class, the smaller tools use 3×18-inch belts, the midsize range includes 3×21-inch size, and when you couple them, they can take up to 3×24-inch belts.

The larger tools have a wider surface for greater smoothing, and they are specialized for greater mechanical stresses. In this case, a 3×21-inch machine will be a good compromise.

When the work reduces to a small scale, such as making a cabinet, there are some smaller belt sanders with 2-2.5-inch belts. These are handy when it comes to one-handed use.

Orbital Sander

When your task is to remove the paint off from old furniture, then an orbital sander will be a perfect one for the job. It works with smoothing more efficiently than a belt sander.

They also work on metal surfaces or composite materials such as solid-surface countertops. These machines have their unique way to function. The sandpaper disc gives a circular motion while the whole pad moves in an oval loop.

In this way, no abrasive particles follow the same path twice. Though it will output you with a smooth texture, the time required is more. So, we recommend getting a belt sander for the flat surface and a disc for the curved. Altogether, your furniture will have a great impact on the outlook.

When you set to buy an orbit sander, be sure to check the motor rating, configuration, and size of the pad and compare them with your work environment. The price range can go from 50 to 100 dollars for low-profile work. Also, if you want to show off, a higher range of prices includes 200 to 300 dollars.

Whatever the type you choose, be sure to set a built-in dust control. You do not want to breadth these materials the sanders remove so effortlessly.

Paint Eater

It is a type of rotating disc sander that is best suited to removing peeling paints. Though it works the same way any other sander does, it does come with some advantages and disadvantages. Some of them are listed below:

Advantages

  • Its paint removal speed is phenomenal.
  • The edges work very easily
  • The disc comes with a greater durability
  • Replacing the disc has never been this easy

Disadvantages

  • High risk of scratching the wood surface
  • The sanding discs are a bit expensive
  • The models come with no dust collection bag
  • Heavyweight

How to remove exterior paint from the wall using a sander

Some cases like the color of your walls are fading away after 2/3 years or you have just painted a new color but do not seem to like it after a few brushes. In these cases, you will face the task of removing paints from walls.

If some of the steps are followed cautiously, then scraping off the paints will not be an easy task. The methods that are commonly used are solely based on your budget. What kind of wall do you want to repaint, or how good are you with the tools available to you?

After you are done organizing the outlines, you are ready to put that new color on your walls. Below goes some of the methods you can go through that includes buying a suitable sander for your task.

Where there is drywall, you can go for the sandpaper. First, wash the walls with soap and water using a piece of cloth. This process removes any dirt associated with the walls and makes the sanding process easy.

Then use perfect sandpaper with a reasonable amount of grit. Make sure to wrap the sandpaper on one side and hold the other to ensure a nice grip.

Or, to make things simpler, get a sander from the top-notch models mentioned above. Understand your walls and let your sander communicate with them. Sanders vary in how they are packed with sandpaper but must incorporate a slot into which you may place the sandpaper before switching it on. A sanding block is a safer alternative to a sander if you’ve never used one before. To find out more, read this article on how to remove flaking paint from exterior walls.

Short notes for some sander elements

Sander pad

It is known as the hand tool that is mostly used by woodworkers to smooth the surface of the wood. These are very efficient because they have the capability of entering the restricted areas where you will find it difficult with a machine.

Sander pads vary in terms of sizes and shapes, the type of sanding medium it is referring to, the physical connection with the medium, and not to mention the driver action.

Lip Seal

It is a genuine substitute for pneumatic orbital sanders, supplied directly from the company. To seal the connection between the sanding pad and the sander body, a rubber lip seal shroud is widely utilized. This lip seal shroud is offered as a single replacement component; for associated parts, check the model diagram.

Dust Bag

This is the most eco-friendly part when you are considering the best sander for exterior paint removal. Most of the models mentioned above have been installed with a built-in dust bag to collect the dirt that is created while sanding a piece of wood or walls.

Though this system is not 100% efficient, it will keep your lungs from polluting and your nose from sneezing, which will lead to some fine work hours.

Variable Speed Controller

While you use a sander, it is necessary to speed up your process at many different stages. For example, when you first start removing paints, you’d want to take your sanding speed to a maximum value to reduce the required time.

The speed controller also depends on the medium. If you are working on woods, then you should provide a slow orbital speed to get a smooth texture and to make sure whether you do not scratch up any woods on your project.

Motor Brush

The sanders are operated by motors. The motor has brushes installed inside of them, which conducts electricity between the stator and the rotor, which allows a motor to rotate and supply the required torque for your paint removal processes.

Cord Protector

Its objective is to protect the power strip from bending or twisting, which can lead to insulation shattering. The cord protector will start drying out and shatter on its own. If there is any damage to the cord protector, it should be replaced as soon as possible.

Frequently Asked Questions

1. Can I use an orbital sander to remove the paint?

Yes! The orbital sander uses both the orbital and circular motion of the disc and the holder to remove and smooth the surface you are working on. Despite being lightweight, removing paints have never been this easy.

2. What sander is best for outside decks?

Decks are mainly constructed from woods. To reshape or remove paint from woods, a random orbital sander will be most suitable because of its simplification and ease of use.

3. How to use an orbital sander to remove paint?

The following shows the steps for removing paint using an orbital sander:

  • Identify the medium under the paint
  • Choose a perfect surface and environment for sanding
  • Sand the surface with slow motion to reach for the smoothness

4. How to choose the best sander?

Choosing the best sander requires some parameters for example, driving power, ranges of grit, weight, durability, and voltage rating.

Do your research about how much technology you can handle and then decide to buy one. You are indeed provided with some of the best.

5. How to take care of your sander?

Some points for taking good care of your sander:

  • Keep an eye on the belts
  • Clean the dust collection bag after every job
  • Check the grits on the sandpaper
  • Make sure the plugins have a firm connection
  • Grease the wheels to lower the friction

6. Where can I buy the perfect sanders?

If you are a lazy person, there is an online market for you, such as Amazon. Or, if you want to have a real-life experience before buying a sander, then Google the sander store closest to you.

7. Why is orbital sander better than all the other types?

One of the key differences is that the orbital sander has a square shape which allows you to get in corners for smooth paint removal. Furthermore, it uses both orbital and circular motion.

8. Can we use an orbital sander to remove the paint?

Yes! With its rotating and vibrating properties, it will leave no circular mark during its sanding and hence efficient smoothing.

9. How many types of sanders are there?

The type of sander available is listed below:

  • Orbital or Disc sander
  • Belt sander
  • Palm sander
  • Detail sander
  • Power Drywall sander

10. How do you remove old exterior paint?

The best approach to remove paint is sometimes with a sharp, hard putty knife or a blade intended for paint scraping. Dust is still present, but it is reduced, and you have more control than with a sander.

Conclusion

Now that you get the whole idea about the best sander for exterior paint removal. So, which model is the best suitable for you? Before reading this article, I am sure the confusion was killing you from inside.

Choose your product carefully, and remember every model has its unique feature, which makes it different from the others. The only thing to consider first is how you want your paintings to be done.

Next time you drink a beer and look at your newly painted deck, make sure to thank us and this article. We are here to make your life easier!

7 thoughts on “10 Best Sander For Exterior Paint Removal: Reviews, Buyer’s Guide, and More (2022)”

Leave a Comment